Workboats

NEW BUILD – Combination Harvester & Pickup Vessel ( ID:1048 )

Posted by on Aug 6, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – Combination Harvester & Pickup Vessel ( ID:1048 )

Material:steel, stainless steel or aluminum. Technical Description:Craft result from the combination between the vessel Harvester and the pick-up vessel, for which features of the�cutting tape and collection, of a central belt which transfers the collected material came from the first tape up to the storage bin and an arm charger for the material discharge. Unlike the Pick-up,you can work with a single operator who, once filled the entire storage area, is transferred in the crane cab command to download the material. They can be propelled...

read more
NEW BUILD – Amphibians ( ID:1060 )

Posted by on Jul 24, 2018 in All Commercial, Work Boats | 0 comments

NEW BUILD – Amphibians ( ID:1060 )

Material: steel, stainless steel or aluminum. Technical Description: Any type of our production vessel for the cutting and collection of algae can be transformed into amphibian and therefore work both in water and on land , being able to climb to the shore due to the three pairs of rubber wheels twinned or tracks to be fitted. The cutting equipment solutions can be decided with the customer.

read more
26m Workboat Multicat For Sale & Charter ( ID:1082 )

Posted by on Jul 23, 2018 in All Commercial, Charter, Work Boats | 0 comments

26m Workboat Multicat For Sale & Charter ( ID:1082 )

Built: 2003, The Netherlands. Hull material: Steel. Flag: United Kingdom. Class Society and Notation: BV Tug Unrest. Nav. Next DD: June 2021. Next SS: October 2022. Next Annual Survey: January 2019. Total power output (BHP): 2300 bhp. Main Engine(s) (make ,type): 3 x Cummins KTA19¬M3. Main Propulsion System: Triple screw. Propellers: 3 Speed cruising: 10.5 knots. Bollard pull: 29.5 tonnes. 70t/m and I 50t/m Effer hydraulic long reach cranes, capacity 13.5 tonnes at 11.6 m reach and 6.2 tonnes at 11.6 m with winch respectively. Towing winch...

read more
NEW BUILD – Watercraft Notching Star ( ID:1044 )

Posted by on Jul 16, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – Watercraft Notching Star ( ID:1044 )

Small to medium workboats fitted at the stern with twin screw propellers for propulsion and two bow propellers that are star-shaped, independent and adjustable in depth, adapted to the cutting of algae. These are particularly suitable for the opening of waterways in dense vegetation. Dimensions and working characteristics are defined in collaboration with the customer.

read more
NEW BUILD – Watercraft Clam ( ID:1067 )

Posted by on Jul 2, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – Watercraft Clam ( ID:1067 )

Designed for cleaning the bottom of the nurseries, for the collection, the storage and selection of clams. Its a hull with flat bottom having installed at the bow a belt conveyor equipped with a particular device (patented) for the removal of the bottom and on the central bridge, approximately 35 square meters, it is possible to install the equipment ( screens, pumps, selectors clams, etc ). Vessels of this type are provided in almost all the Venetian lagoon and several consortia of Chioggia Fishermen, Goro and surroundings . Thanks to...

read more
NEW BUILD – 14m Fire Fighting & Rescue Boat ( ID:1066 )

Posted by on Jun 29, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – 14m Fire Fighting & Rescue Boat ( ID:1066 )

The design and specification of the 14 m FRV makes it highly suitable for the following roles: 1: Firefighting, 2: SAR, 3: Command and Control Centre, 4: Humanitarian and Disaster relief and rescue.

read more
NEW BUILD – Watercraft Pickup ( ID:1059 )

Posted by on Jun 21, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – Watercraft Pickup ( ID:1059 )

Natanti acts to cutting, collection, grubbing and infested vegetation drain and floating solid waste or semi-submerged . The cutting system and frontal collection consists of a U-shaped cutter toolinstalled on a conveyor belt, adjustable in depth, able to charge what has been collected in the central storage container. They can be propelled with screw propellers with antialghe system or with paddle wheels.

read more
NEW BUILD – 13m HDPE Crew Boat ( ID:1032 )

Posted by on Jun 18, 2018 in All Commercial, New Builds, New Commercial Build, Offshore Industries, Work Boats | 0 comments

NEW BUILD – 13m HDPE Crew Boat ( ID:1032 )

Speed: 32 Knots. Main Engines: 1x Cummins QSM 11. Total Power: 485kW (660hp) at 2300 rpm. Propulsion: 1x Fixed Pitch Propellers 800mm Diameter.

read more
NEW BUILD – Milling Cutter ( ID:1042 )

Posted by on Jun 9, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – Milling Cutter ( ID:1042 )

This is watercraft equipped with rollers with knives or zappette acts grubbing of roots at the bottom of the channel, or lagoon, and all ‘oxygenation�of the same.They also allow pianeggiare the seabed after the grubbing operation.They are equipped with two or four rollers depending on the size of the hull.They can work at times even in the absence of water, moving on the ground thanks to the rollers.

read more
NEW BUILD – 12.5m Work Boat – M Hull ( ID:1040 )

Posted by on Jun 9, 2018 in All Commercial, New Builds, New Commercial Build, Work Boats | 0 comments

NEW BUILD – 12.5m Work Boat – M Hull ( ID:1040 )

Engine: 2×250 hp OB. Fuel: 1000L. PAX: 6 crew. Cargo: 6 ton

read more