NEW BUILD – 19.95m Fishing Vessel ( ID:1312 )

TEL: +44 7798 607 323

MAKE: NEW BUILD - 19.95m Fishing Vessel

DATE LAUNCHED: Built to order
LENGTH: 19.95m (65ft 5in)
BEAM: 7.35m (24ft 1in)
LOCATION: ex shipyard, Auckland, New Zealand



Click to Email


This design is intended as a trawler or longliner, offered in three increments (20, 22 and 24metres). The size variants provide the opportunity for fishers to tailor their fish hold volume to suit their operational requirements, around a common engineering backbone. The hull and layout is also designed to facilitate easy mid-body extension using a pre-fabricated module to adapt to changing needs in the future.

The underlying philosophy is of rigorous engineering of a reliability- and longevity-focused platform. Accordingly the specification has been developed based on the highest quality equipment and fittings available. Initially offered with conventional diesel propulsion, we would be pleased to work with your customers on low-emission variants if this is of interest.

A well-designed fish hold is tailored for the fish cases used in operation: steps in the sole and sides to accommodate the hull shape are sized and located to suit efficient and safe stacking. The fish holds are currently designed around standard fish cases common across the New Zealand marketplace and we recommend that we adapt the hold layout to suit other fish case geometries for other geographies.

Built in aluminium, significantly over-strength and further ballasted for seakeeping performance, this vessel offers greater strength and dramatically reduced through-life maintenance compared with a steel equivalent. Structural design is well in excess of Lloyds Register requirements. The specification has been developed to meet or exceed the Maritime NZ standards, but if you have a customer seeking to operate in another jurisdiction we would be happy to review the appropriate regulations and quote for minor changes required (if any).

Crew comfort is foremost in this design, with sleeping for six, in three separate cabins and generous galley, mess and washroom facilities, all finished in modern, easy-case materials to ensure a high visual and hygiene standard can be maintained with minimal maintenance.

This is conceived as a vessel to deliver many decades of efficient, reliable fishing.


Length O.A.: 19.95m
Length W.L.: 18.90m
Beam: 7.35m
Depth to main deck: 3.95m


Fish Hold LxBxD: 7.3m x 5.9m x 2.1m
Fish Hold Volume: 84m3
Fish Cases: 912
Fuel: 22,000 L
Hydraulic Oil: 800 L
Fresh Water: 21,000 L
Waste Water: 800 L
Crew: 6


Regulatory authority: Maritime New Zealand Rule 40D


Welded Aluminium (5083 / 6061)
Scantlings in excess of Lloyds Register SSC Requirements
Hull Bottom: 12 mm
Hull Sides: 12 mm
Main Weather Deck: 12 mm, sand blasted
Upper Deck: 6 mm, sand blasted
Superstructure: 8 mm
Bulkheads: 8 mm
Builder: McMullen & Wing, Auckland New Zealand
Designer: McMullen & Wing, Auckland New Zealand


1 x Scania DI16 071M “A-rated” marine diesel engine 460bkW (617 bhp) @ 1800 rpm
Dry exhaust, heat-exchanger cooled, rigid mounts
Keel cooling option


ZF 2450 5.036:1, vertical offset, close coupled to engine
Oil cooler, rigid mounts


ZF ClearCommand at wheelhouse helm
Secondary controls at winch station (inside wheelhouse)

Propeller shaft

4.5” duplex stainless steel
Water lubricated face type shaft seal, from engine pump


VEEM or equal 62” diameter, 3-blade, 65% blade area, skewed Kaplan Material NiBrAl
Nozzle (optional): RICE or equal (fixed)


Generator (optional)
1 x Caterpillar 86kVA, 3-phase 50Hz
Dry exhaust, heat-exchanger cooled, flexible mounts
Keel cooling option


24VDC, 2-pole above earth, 800Ah service bank capacity
400V/230VAC supply from generator direct to specific equipment.
32A 400V/230V shore power supply (shore power transformer optional)


Mastervolt MasterBus battery monitoring, incl tank levels for fuel, fresh water & waste tanks, bilge level alarms.
Proprietary alarms & gauges as supplied with engines, generator, refrigeration and hydraulic systems.
Hull protection: Sacrificial anodes

Fuel filters

Main engine: Racor 751000 MA10 (Duplex)
Generator:: Racor 500 MA10 (Simplex)

Hydraulics (optional)

2 x 140cc/rev variable displacement piston pumps, off main engine PTO
Emergency retrieval backup by 2 x 22ekW HPU, powered by generator High pressure inline filtration (210 L/min)

Steering system

Power hydraulic from PTO drive on main engine (stand-alone)
Backup electric HPU (emergency steering)


Fabricated stainless steel blade
4” Duplex stainless steel stock

Stabilisers (optional): McMullen & Wing external retractable fixed fins
Fire/deck wash pump: AZCUE CA-50-3B (or equal)

Engine Room fire suppression (optional): FirePro FP-3000 (or equal) condensed aerosol fire suppression system with alarm, automatic thermal and remote manual electric activation.

Bilge pumps

4 x Rule 24VDC 3700 GPH
Engine driven secondary pump
Jabsco Amazon Warrior or equal 135 LPM manual backup

Air-conditioning (optional)

Mitsubishi or equal domestic wall-mounted heat pump (4.5kW heating), located in crew mess

Underfloor heating (optional)

230VAC electric underfloor heating to galley & mess sole above fish hold


Fan forced ventilation for head and washroom
Domestic rangehood to galley, ducted to shelter deck
Laundry equipment ducted to shelter deck
Opening window in galley to shelter deck
Opening window in wheelhouse to side deck, port and starboard
Fan forced ventilation to engine room with moisture eliminators on inlet & outlet

Water maker (optional)

Resolution (or equal) reverse osmosis watermaker, 250 LPH


Holding tank
Overboard discharge (electric macerating pump)

Fish hold (optional)

Linings & sole: plywood/foam with FRP tanking, finished with white, food grade epoxy paint system
Insulated aluminium weathertight unloading hatch, with crew hatch within

Fish hold climate control (optional)

Climate control fish hold refrigeration system, temperature range +1 to -1oC
Dedicated sea-water condenser refrigeration system, in engine room Compressor components by Bitzer, Bock or equal
R449a primary refrigerant, confined to engine room
Monopropylene Glycol secondary refrigerant
Davies (or equal) glycol circulation pump
Glycol circulated through 38mm OD S/S tubing in fish hold deckhead

Flake ice maker (optional)

Buus (or equal) horizontal drum ice flaker, 2,500kg / 24 hr, in fish hold
Dedicated sea-water condenser refrigeration system, in engine room
Compressor components by Bitzer, Bock or equal
R449a primary refrigerant, confined to engine room
Monopropylene Glycol secondary refrigerant
Davies (or equal) glycol circulation pump
Mixed sea water / fresh water supply with automatic salinity control


Winch control station
Aft facing, in wheelhouse
Electric proportional winch control
Two-way communications to aft gantry (push to talk)

Trawl winches (optional)
2 x Neumann Equipment (Jaden) TRW4000 Special trawl winches
Capacity 1812m of 16mm wire rope
Line pull: 8,865kg bottom layer
4,000kg top layer
Line speed:45m/min bottom layer
100m/min top layer
Overhead wire guide with hydraulic cylinder

Net drum (optional)

Neumann Equipment (Jaden) NET4000 Special net drum
Capacity 7.2m3
Line pull: 31,750kg on drum
3,600kg full
Line speed: 15m/min on drum
78m/min full

Cod end winch (optional)

Pullmaster M12 Type 1 drum winch
Capacity 68m of 16mm line
Line pull: 4,390kg bottom layer
3,327kg top layer
Line speed: 22m/min bottom layer
52m/min top layer

Gilson winch (optional)

Pullmaster M8 Type 2 drum winch
Capacity 55m of 16mm line
Line pull: 3,780kg bottom layer
2,780kg top layer
Line speed: 35m/min bottom layer
61m/min top layer

Longlining (optional)

Mustad Autoline Coastal® or SelectFish® system
Main Hauling Unit
Second Hauling Unit or Hook Separator
SettingUnit, or AutoBaiter
Drum unit or Manual MagpackerTM storage system

Ground tackle

2 x Manson 155kg HHP galvanised steel anchors
1 x primary rode: 110m combination 16mm steel short link chain & wire rope
1 x secondary rode: 10m 16mm steel short link chain on 100m nylon rope

Anchor windlass

Neumann Equipment (Jaden) DRUM-ANCHOR Special
Chain & wire stowed on drum above deck
Capacity 80m of 16mm wire rope & 30m 16mm short link chain
Line pull: 4,875kg bottom layer
2,750kg top layer
Line speed: 11m/min bottom layer
20m/min top layer

Gantry (optional)

Painted steel gantry, bolted to aluminium air trunks
Includes mounting for engine exhausts and deck lighting as applicable

Boom (optional)

Galvanised steel boom
Manual slew; fixed luff
Pullmaster PL2 hydraulic line winch

Crane (optional)

Palfinger PC3800B SH0.8 (or equal)
Capacity 3.7 Tm.
720 kg lift at 5.0m reach
3-stage hydraulic extension
800kg drum winch


Furuno 10” dual frequency colour sounder
1kW 50/200 kHz transducer with temperature sensor


Furuno 10.4” colour radar with 4kW 36nm radome

Chart plotter
MaxSea TimeZero Pro with NZ Charts
Fanless PC computer with SSD drive
Vistaline 19” sunlight readable display with marine dimming

GPS: Furuno GP39 4.2” monitor
AIS: Furuno FA50 Class B AIS
Automatic pilot: Furuno NAVpilot 700 Adaptive autopilot
VHF: Furuno FM4800 VHF


2 x Furuno FI70 multi-function display (NMEA)
Outputs can include wind data, rudder angle, water temp or other NMEA data

Loud Hailer

Furuno LH5000 loud hailer
2 x TOA horn speakers
2 x push-to-talk buttons
Head unit located in wheelhouse at winch station
Speakers mounted on gantries P & S
PTT stations mounted on gantries P & S, nominally 1200mm above deck

Interior Audio

Fusion head unit: AM/FM tuner with Bluetooth & USB input
2 pairs 6” ceiling speakers

Crew Mess Television:

32” Samsung (or equal) LCD television (crew mess)
Digital TV antenna – digital amplified omnidirectional VHF/UHF

Wheelhouse Television (optional):

32” Samsung (or equal) LCD television (wheelhouse)

Satellite TV (optional): Satellite TV receiver (marine)
Video players (optional): Blu-ray players local to each TV screen


A spacious, comfortable interior with clean, contemporary aesthetic, utilising hard-wearing, easy-care materials throughout

Deck heads

White HPL or composite panels on Fastmount (or equal) removable clips


White HPL panels with grey aluminium joiners

Passage doors

White or grey HPL or painted hinged doors with ventilation grilles


Timber-look vinyl in crew mess, galley, wheelhouse and washroom
Carpet in crew cabins
Painted aluminium deck in head
Aluminium tread plate panels to walkways in engine room

Mess & circulation space

Banquette seating upholstered in wipeable vinyl; storage under (top access).
Table in grey HPL on plywood with clear finished edge grain, on fixed stainless steel post.
Stairs up to wheelhouse: vinyl treads with non-skid nosings; stainless steel hand rails each side.
Watertight escape hatch to foredeck, at entrances to crew cabins


Grey HPL (Formica, Wilsonart or equal) benchtop, white HPL cabinets underbench, shallow white HPL cabinets over bench.
Storage under stairs
Pressed surface-mount stainless steel sink with draining board (Mercer or equal)
Methven hot/cold mixer faucet
Elba by Fisher & Paykel 60cm electric underbench oven
Elba by Fisher & Paykel ceramic electric cook top
Elba by Fisher & Paykel Wall-mount rangehood, ducted to shelter deck
2 x Westinghouse (or equal) 370L upright fridge/freezer (bottom mount)
Fisher & Paykel (or equal) washing machine and dryer (stacked)


Gloss white painted aluminium walls
Tecma (or equal) electric macerating marine toilet, fresh water flush
Mercer (or equal) stainless steel hand basin
Methven (or equal) hot/cold mixer faucet
Wall-mount mirror
Wall-mount fittings: soap dispenser, toilet roll holder, paper towel dispenser


800x800mm shower with stainless steel tray (Mercer or equal), white HPL walls
(Seratone or equal), stainless steel grab rails and shower curtain on rail.
Mercer (or equal) stainless steel hand basin
Methven (or equal) hot/cold mixer faucet
Goldair (or equal) heated towel rail
Wall-mount mirror
Wall-mount fittings: soap dispenser, paper towel dispenser

Starboard crew cabin (Skipper)

2 x bunks with nom. 1900 x 750 mm inner sprung mattresses
Gear locker forward (white HPL)

Port crew cabin:

2 x bunks with nom. 1900 x 750 mm inner sprung mattresses
Gear locker forward (white HPL)

Forward crew cabin:

2 x bunks with nom. 1900 x 750 mm inner sprung mattresses
Gear locker aft (white HPL)
Flush sole hatch to access forward tank room under


Bench seat on port side, upholstered in wipeable vinyl; storage under (top access).
Desk / chart table in grey HPL on plywood with clear finished edge grain, on fixed stainless steel post.
Dashboard in black or dark grey HPL top and cabinetry under
Winch station against aft bulkhead
KAB (or equal) helm seat in wipeable vinyl
Weathertight door aft to exterior
Opening window adjacent to helm

Engine room

Weathertight access door in port side leg of gantry
Secondary access door in starboard side leg of gantry


Hull sides & superstructure: Unpainted aluminium
Decks: Sandblasted aluminium
Hand rails: Fabricated aluminium
Graphics: Vessel name, port, MNZ number and fishing number in applied vinyl lettering
Hatches: Kontrail, Freeman (or equal)
Exterior doors: Kontrail, SeaMac (or equal)
Windows: Thermally toughened glass by Metro Performance Glass (or equal)
Joinery by SeaMac (or equal)
Wipers (optional): Hepworth (or equal) 24VDC pantograph wiper with fresh water spray

Weather Deck

Trawl ramp in transom, fabricated in heavy plate aluminium with aluminium wear bars
Aluminium gantry foundations incorporating engine room access, engine room ventilation & exhausts
Painted steel gantry arch supporting deck equipment & lighting
Aluminium hatch to fish hold, hinged

Shelter Deck

Gear locker to port
Mercer (or equal) stainless steel hand basin to port, with Methven (or equal)
hot/cold mixer faucet and wall-mounted soap dispenser.
Folded aluminium stairs up to upper deck, sandblasted finish, with fabricated
aluminium handrails both sides.
Gear locker under stairs.

Upper Deck (aft)

Door to wheelhouse
Palfinger crane (optional)
Aluminium rails with removable boarding gate

Upper Deck (fwd)

Side decks port & starboard, to foredeck
Anchor & windlass
Spare anchor
Forepeak hatch
Escape hatch from cabins below
Life raft (buyer supply)

Interior lighting

6 x EuroLED 150 Touch (White & Red – with integral switch) in wheelhouse
16 x EuroLED 95 (White) in interior spaces
1 x LED Flex chart lamp (white & red) in wheelhouse
6 x LED Flex reading lamp (white) in crew cabins
20 x DuraLED 50 (white) in engine room and fish hold
14 x Emergency lights

Exterior lighting

3 x Hella Hyper Lume LED flood lights
5 x Hella AS3 LED flood lights
3 x DuraLED 50 (white) in shelter deck
Hella LED navigation lights to NZMSA requirements

Searchlight (optional):

Hella remote operated halogen search light


Maritime NZ
Shipyard to fit buyer-supplied safety equipment to Maritime NZ requirements

Drop files to upload