New Build 11m Blyth Catamaran: POA (ID:CC3145)





TEL: +44 (0) 1983 282 777 


MAKE:   Blyth 11m Catamaran


YEAR:   New Build


BUILDER:   Blyth Workcats


LOA:   11.00m
BEAM:   4.87m
DRAFT:   0.50m
LOCATION:   Ex. Factory




Click to Email:      





Base Hull with stringers

Additional cost to Seafish/Irish P5 schedule for hull layup

All ply bulkheads, deck supports (transverse and longitudinal),

deck support timbers bonded into hull and crash tanks

Plydecks fitted and sheaved

Non-slip finish applied to deck and coated in polyester

Flo coat to all GRP surfaces of mouldings

Engine GRP vent boxes pair - through bulwark

Freeman deck hatches and surrounds x4

Engine hatches and surrounds per pair

Aft deck combing

Forward deck combing (not required with full deck) 1m of deck

Cut out scupper and gel exposed glass fibre edges

Hull and deck fittings / work

Door in Port or Stbd gunwhale

Supply and fit stainless steel boarding ladder

Samson post (heavy duty) supplied and fitted, glassed into deck


Enclose bilges under enginesGel below gunwales from deck to combing

Make each aft compartment watertight in respect of aft engine bay bulkhead

Fire retardant gelcoat to engine bays (grey)

Supply and fit 4" D rubber fendering

Rails supplied ex foredeck rails (for Island wheel house)

Small stemhead fitting with stainless roller

Supply and fit spring cleats pair

Supply and fit 2 stainless stainless steel bollards fwd

Supply and fit engine sound insulation to engine hatch lids



Wheel house std (11'x 8') Fwd Facing

8' roof extension aft

Supply and fit helm unit in grey laminate teak capped prices from

Supply simple galley in grey formica teak capped

Lining to wheel house - sides only in cord

Lining to wheel house roof in foam-backed vinyl

Toilet unit shell fabrication, including door,

Forward structure floor in each fwd hull

Windows supplied and fitted with one access door

Pilot Helm Seat supplied + fit on GRP

Engines and ancillary items

Iveco nef 280

Std twin disc geabox

Gearbox PTO

Extension Looms

Separ Filter complete


Engine Bearers

Fit engines supplied by Blyth workcats

Supply and fit stern gear assuming 1 3/4" shafts on stern tubes with greasers

Sure Seals

Supply and fit anodes wired to shafts

Supply and fit twin propellers (200 - 370hp)

Anchor winches and Hauling gear

Supply & fit 1200w electric winch and anchor

Engine Water cooling

Inlet, Ball valves, Vetus FTR330 filter, glass reinforcing ply into

hull for seacock and filter board connect all hoses back to engine

Exhaust system

2 x Exhaust hose, connected to (risers), rubber transom flaps all fitted

Engine controls

Throttle and gear single unit dual morse control supplied and fitted with cables


Hydraulic steering supplied and fitted

Supply and fit rudders (see advice)

Fuel System

2 x pre-filters, fuel lines and fuel cut off valves

Supply and fit SS fuel tanks 2 x approx 140 gal

Fuel tank sender units and gauges supplied and fitted


Standard 24v wiring

Blyth breaker panel

Interior lighting

Jabsco 24v toilet

Standard Radar arch in stainless steel

Nav lights with cables run to helm and connected to panel (excludes panel)

Windscreen wipers supplied and fitted 2 centre screens Vetus

Instrumentation and Electrical equipment

Supply and fit std transducer block

2 x VHF aerial supplied and fitted

Wheelhouse electronic equipment see separate spec inc fitting

Engine Electrics

Supply 4 x heavy duty batteries port, stbd, house, parallel, switched

wired back to engines and connect to dashboard looms for engine

Generators and AC Power

Supply and fit ring main with 3 outlets and shore power inlet

2.5KW inverter charger

Plumbing and Heating

1 Elec bilge pump to each engine bay - manual operation only.

1 Additional Elec bilge pump fitted to all other hull compartmets with float switch auto/manual operation

Supply 4 x manual bilge pumps (to cover all compartments)

Supply and fit standard tap sink unit to toilet cubicle

Supply and fit standard galley sink and tap

Supply and fit pressurised water system including 50 gallon water tank and pump

Supply & fit waste tank 25 gallon with 3 way pump out valve

Eberspacher Diesel heater 5 outlet


Crane hire and lifting services

Factory boat lift and lifting services

Oil up engines and antifreeze

Fuel for Sea trials


3 names with port of registry

Safety Labels for COP

Std Design charge for Stability book

Design & Survey Fees for Irish P5

Common client specified extras


Install bridge electrics assumes 5 items

Emergency Manual Fire Pump

Deckwash electric pump

Exterior deck light

House battery system

Wheelhouse ladder

Emergency backup battery and box mounted on roof and battery charge monitor

Safety equipment 12 persons to MCA COP (excl life raft)

Remote activated CO2 extinguishers

Emergency tiller

Fire proofing engine compartment

Stainless steel fuel lines

Simple Water Boiler and Microwave Cooker/Grill

Fitting of liferaft bracket

Important note: If the item is not specifically itemised above, it’s not included.

Radar / Chartplotter

Garmin GPSMAP4010 10.4” Colour Display with GPS antenna

GMR18HD digital Radome c/w 15m cable

UK & Ireland g2 chart EU706L

Wheelhouse Electronics Package


Lorenz Magnum Pro C-Map chart controller c/w GPS, C-Map chart & 17” monitor (12 volt DC)


Navitron NT777 comprising control unit, distribution box & rudder feedback unit.

Constant running pump 0 to 2.5 litres/min 24volt DC

Navitron NT920NFU Non Follow up power steer (jog) lever

Fluxgate sensor for autopilot heading

Echo Sounder

Koden CVS-128 8.4” Colour Echosounder dual frequency 50/200 kHz

Bronze Through Hull Transducer for above

Icom IC-M505 DSC /VHF Radio c/w fist mike

Icom IC-M603 DSC /VHF Radio c/w fist mike

Fixed VHF Radios

Shakespeare RV240 2.4m VHF antenna c/w 6m cable

VTronix ARMNT Stainless steel antenna base

PV6S 24-12 volt DC converter for VHF


Kannad Automatic EPIRB in float free auto release container, Wheelmarked.

2 x handheld VHF's with DSC


Offered by Solent Brokers: POA


Further Information Tel: +44 (0) 1983 282 777   or   Email: